Top quality 600 watt Diode Laser machine for hair removal treatment in spa, clinic and hospital. Fast hair remove in 1 hour for whole body treatment; Effective results in 4-5 sessions; Long working time for non-stop working for 8 hours; Qualified spare parts from US and Germany.
It works on:
1. Permanent hair removal in 4-5 sessions, much painless, fast treatment, effective results.
2. Skin lightening, skin rejuvenating, whiten skin.
3. Skin tight, skin lift.
Main Characteristics you shall pay attention to:
1. Laser generator are from US, reliable quality, long lifetime and good performance.
2. Guarantee 1 year or 3 million pulses lifetime.
3. Guarantee long working time for a whole day treatment.
4. 808nm laser in 12mm*12mm spot size.
5. The connector between handpeice & machine (PnP) is in new design with Patent Technology.
6. System checks the whole machine working automatically when it is turned on.
7. You can manage the machine usage by password.
8. There are two working modes - HR & FHR.
9. The maximum energy density upon 808nm laser’s FHR mode is 25J/cm2 which is even higher than most of similar machines' 20J/cm2.
10. Whole appearance of the machine is done by injection molding process.
11. It is with Germany imported hose for handpieces which protects tube structure and easy to clean.
Important Characteristics you shall not miss:
A) Strong & Competent Water Management System:
Most of the basic parameter and design of 808 machines is similar with others. But compared with most of the other machines one big advantage of our 808 laser is that we have strong water management system, which avoiding using of Freon compressor.
As you may know, for 808nm diode system, the water management & filtration is very important. Most of the companies had the 808nm machines very early but they are not able to deal with the water management technology very well. So they simply use Freon compressor for cooling. We began to learn, design and produce the 808 machine since 2009. So we have already done it for more than two years. We put a lot of investment in money, study, material choosing, lots of tests & failures to make it. Now we succeed.
One reason is that the laser generator we adopted has very high request upon the water circulation and filtration. To the safety & stable use of the laser generator we have to 100% finish a competent water management and filtration; Another reason is that if not having strong water management and filtration we have to use Freon compressor as others.
It is not good for two main reasons: one is that Freon is harmful to air environment so it can only be shipped by sea. Another reason is that the Freon compressor produces condensate water which is harmful to laser generator. This is the worst. After having the technical ability of a strong & competent water management and filtration we can avoid using the Freon compressor. In our machines we adopt the radiator which is imported from USA. This is well solved the problem and make it possible to be shipped by air.
B) Self-checking Function:
Self-checking is a new system we put inside new models of 2012. it is a big update upon our technology so we call these new models"2nd generation products". When the machine is working the self-checking system will check the machine automatically. It will check the water cooling system, electronic system, and laser generator working.etc. Once there is problem somewhere. It will report to the control system and show on the screen display the code we set for the exact spare part. This system is to ensure the safety use of the machine and no harm to human body. If the problem is serious the machine will be cut off automatically. Meantime it gives great assistance to the after-sales services. This is convenient for instrument maintenance and improves maintenance efficiency.
C) Electric Parameters Checking:
Current collecting of Hall sensor -I1
Output current of power supply -I2
Output voltage of power supply -V1
Over temperature / normal(power supply chip) -I3(ok/NG)
Light / no light( power supply) -V2(ok/NG)
Stop / normal( power supply) -K1(ok/NG)
Active / inactive -D1(ok/NG)
Short / normal -Q1(ok/NG)
1. Light sources Diode (continuous wave)
2. Laser wavelength 808nm
3. Modes FHR mode/HR mode
4. Spot size 12mm*12mm
5. Fluency Up to 120J/cm2(HR mode); Up to 25J/cm2(FHR mode)
6. Pulse duration 10~1400ms
7. Repetition rate Up to 10Hz
8. Delivery Direct coupling through sapphire tip
9. DuaChill intrgrated skin cooling 4 ℃ (Contact cooling)
10. Electrical 110/220V 15A max 50/60Hz
Packing & Shipping Details:
Physical dimension: 380mm*540mm*1250mm
Gross weight: 65kg
Packing in carton, 1pc/carton.
Shipment: DHL, FEDEX, TNT, Airway, Seaway is acceptable.