- 808 NM DIODE LASER: Professional 808 nm diode laser equipment for hair-removal applications.
- SERVICE INFORMATION: The original product listing states a one-year or three-million-pulse service term; verify the applicable warranty conditions.
- CONTACT COOLING: Includes integrated contact cooling and water-management functions for operating temperature control.
- 12 × 12 MM SPOT: The laser handpiece provides a 12 × 12 mm treatment spot.
- HANDPIECE CONNECTION: Plug-in connector links the treatment handpiece to the main system.
- AUTOMATIC SELF-CHECK: The controller checks monitored operating systems and displays fault information.
- PASSWORD ACCESS: Operators can manage device access through a password setting.
- TWO OPERATING MODES: HR and FHR.
- MODE SETTINGS: The specifications identify HR fluence up to 120 J/cm² and FHR fluence up to 25 J/cm².
- MACHINE HOUSING: Injection-molded exterior enclosure.
- HANDPIECE TUBING: Protective hose design for convenient handling and cleaning.
HR-808D 808 nm Diode Laser Hair Removal System
$18,000.00
HR-808D is a professional 808 nm diode laser system with a 12 × 12 mm spot, selectable HR/FHR modes, water-management functions, contact cooling and automatic system checks. Refer to the technical specifications for operating parameters.
Key Operating Features:
1. 808 nm diode laser operating mode for professional hair-removal procedures
2. HR and FHR selectable operation modes
3. Contact cooling, password control and self-check features
Technical Features:
A) Strong & Competent Water Management System:
The HR-808D includes water circulation and filtration features designed to support stable operation and cooling of the diode laser source.
Water circulation and filtration are important elements of the cooling system. The earlier listing describes a radiator-based cooling arrangement without the conventional Freon compressor referred to in the comparison. Operators should follow the manufacturer’s cooling-system maintenance and filtration requirements.
Correct water circulation and filter maintenance help the device manage operating temperatures. Check the maintenance instructions before prolonged use.
The cooling design uses water circulation, filtration and a radiator as described in the original equipment information. Confirm the supplied cooling configuration and shipping arrangements with Norlanya when ordering.
B) Self-checking Function:
The built-in self-check feature monitors selected operating systems and displays information for service review. The monitoring functions cover the cooling system, electronics and laser source. When a monitored fault occurs, the controller can display a related fault code. The self-check function monitors certain faults; all applicable laser safety precautions must still be observed. The machine is designed to interrupt operation when selected fault conditions are detected. Meantime it gives great assistance to the after-sales services. This is convenient for instrument maintenance and improves maintenance efficiency.
C) Electric Parameters Checking:
Current collecting of Hall sensor -I1
Output current of power supply -I2
Output voltage of power supply -V1
Over temperature / normal(power supply chip) -I3(ok/NG)
Light / no light( power supply) -V2(ok/NG)
Stop / normal( power supply) -K1(ok/NG)
Active / inactive -D1(ok/NG)
Short / normal -Q1(ok/NG)
Technical Specifications:
1. Light sources Diode (continuous wave)
2. Laser wavelength 808nm
3. Modes FHR mode/HR mode
4. Spot size 12mm*12mm
5. Fluency Up to 120J/cm²(HR mode); Up to 25J/cm²(FHR mode)
6. Pulse duration 10~1400ms
7. Repetition rate Up to 10Hz
8. Delivery Direct coupling through sapphire tip
9. DuaChill integrated skin cooling 4 ℃ (Contact cooling)
10. Electrical 110/220V 15A max 50/60Hz
Packing & Shipping Details:
Physical dimension: 380mm*540mm*1250mm
Weight: 50kg
Package dimension:
Gross weight: 65kg
Packing in carton, 1pc/carton.
Shipment: DHL, FEDEX, TNT, Airway, Seaway is acceptable.
Reviews
There are no reviews yet.