- Integrated semiconductor cooling: the cooling area begins working as soon as the device is powered on, helping reduce heat sensation and improve treatment comfort. Cooling gel is not required and should not be used with this device.
- Two treatment functions in one system: HR for hair removal and SR for skin rejuvenation, with energy output up to 7.5 J/cm². No replaceable light cartridges are required.
- Long lamp life: rated for 300,000 shots, with effective use able to reach up to 500,000 shots.
- 7.5 cm² treatment window + EXP/OPT modes: the larger treatment area and fast OPT mode help cover larger body areas more efficiently.
- Quiet operation: operating noise is less than 55 dB.
Stylight+ Home IPL Hair Removal Device with Cooling
$359.99
IPL stands for Intense Pulsed Light, a broad-spectrum light technology used for hair removal and cosmetic skin treatments.
Unlike a laser, which uses a narrow wavelength, IPL delivers pulses across a broader spectrum. In hair-removal mode, light energy is absorbed by melanin in the hair and converted to heat, helping reduce regrowth over repeated treatments.
Stylight+ B208+ is the upgraded version of the Stylight B208, designed for at-home IPL hair removal and skin rejuvenation. Stylight+ is suitable for skin types I to V. It works best on black, brown and light-brown hair, with more limited results on very light, white, gray or golden hair. It can be used on suitable facial and body areas, including private areas. Visible hair-reduction results can typically be seen after about 8-10 weekly sessions and may continue to improve with regular use. A full course of around 15-20 weekly sessions is recommended, followed by periodic maintenance treatments to help maintain long-lasting results.
Stylight+ combines energy control with semiconductor cooling around the treatment window. At an indoor temperature of no more than 25°C, the treatment surface is designed for a controlled output temperature of approximately 40-56°C from the lowest to highest energy setting. The integrated cooling helps reduce heat sensation during treatment. Do not use cooling gel with this device.
Key Features
Two treatment functions: HR (Hair Removal) and SR (Skin Rejuvenation).
- HR: Use approximately once per week. Visible hair-reduction results may begin after 8-10 sessions and continue to improve with regular use.
- SR: Supports smoother, more even-looking skin and helps improve the appearance of fine lines, spots and marks. Use approximately once per week.
- No replaceable cartridges: the lamp is rated for 300,000 shots, with effective use able to reach up to 500,000 shots.
- Wavelength: 650-1200 nm. Broad-spectrum IPL output supports both HR and SR treatment modes.
Two operating modes: EXP (Classic) & OPT (Fast).
- EXP: In HR mode, one trigger press delivers two flashes; in SR mode, one trigger press delivers one flash.
- OPT: Press and hold the trigger for repeated flashes—up to 1 Hz in HR mode and 2 Hz in SR mode—for faster coverage.
- OPT mode is intended for faster treatment of larger areas.
Integrated Semiconductor Cooling.
- The semiconductor cooling plate starts cooling immediately and can reach about 41°F (5°C) at the cooling area after around 20 seconds, helping improve treatment comfort.
Stylight+ B208+ Specifications
- Lamp: Xenon Lamp
- Light Source: Pulsed Light
- Energy Fluence: up to 7.5 J/cm²
- Treatment Window: 7.5 cm²
- Wavelength: 650-1200 nm
- Rated Lamp Life: 300,000 shots
- Rated Input Power: 150 W
- Power Supply: AC 100-240 V, 50/60 Hz
- Large 7.5 cm² treatment window for faster coverage at home.
- Designed to cover larger treatment areas more efficiently.
- Up to 7.5 J/cm² maximum energy output for adjustable treatment intensity.
- Three energy levels are available through the soft-touch control panel.
- Designed for at-home IPL hair removal and skin-rejuvenation treatments.
- Built-in shot counter displays total flashes used for easier lamp-life tracking.
How to Use Stylight+ B208+
HOW TO USE
-
- Place Stylight+ on a stable, flat surface, connect the power cable and switch on the device.
- Shave the treatment area, leaving about 2-3 mm of hair, then clean and dry the skin.
- Do not apply cooling gel. Start with the lowest suitable energy level.
- Put on the protective goggles, select HR or SR and EXP or OPT, then set the energy level. Wait until the charge indicator shows the device is ready.
- Place the treatment tip fully against the skin, unlock the handle if required, and press the trigger to flash.
- Move to the next area and continue as needed. If treating the same skin area again, allow at least 30 seconds between exposures.
Treatment Schedule & Tips
- For hair removal, use approximately once per week during the initial treatment course.
- Visible hair-reduction results may begin after about 8-10 weeks of regular use and continue to improve with treatment.
- A full course of about 15-20 weekly sessions is recommended for long-term hair reduction.
- After reaching the desired result, periodic maintenance treatments can help maintain the effect.
- Some hair regrowth between maintenance sessions is normal because hair grows in cycles.
- After treatment, clean the treated skin. If it feels warm, allow it to cool naturally or use a suitable cool compress.
- Apply a gentle moisturizing lotion after treatment if needed.
- After the unit has cooled, clean the treatment window and cooling area with a soft, slightly damp cloth and make sure no residue remains before storage.
- Start with a low energy level and increase gradually according to skin response and comfort.
- Do not start at the highest energy level. Increase only after checking your skin response.
- Do not use cooling gel with this device.
- For darker skin tones, use lower energy settings and follow the skin-tone guidance in the user manual.
- Keep the treatment window clean before and after each session.
C**** –
Superb customer service! Lisa was so helpful and attended all my queries promptly. Delivery was very fast and reliable. The machine is very slick and portable. Easy to operate and hopefully it works! Will update again after 4 to 8 weeks.
S**** A****** –
Excelente servicio de la tienda! Hubo un par de incidentes con la salida del producto de almacenes y en todo momento se comunicaron conmigo; enviaron el producto por paquetería express. El producto es tal cuál lo que anuncian! Gracias vendedor !